Home > Services > Burn-in & Hardware Department

Engineering and Hardware

Engineering and hardware capabilities, all you need for your test:

  • Burn-in test program development
  • Boards design
  • Board assembly
  • Board test and calibration (3S system)
  • Burn-in boards (different configuration), hast boards, ESD fixtures and other customized boards.

Burn-in Operation

Burn-in Operation Capabilities Verity & Capacity:

  • H.T.O.L (High Temp Operating Life)
  • L.T.O.L (Low Temp Operating life)
  • Early lifetime failure
  • Customized temp burn-in (- 40C TO +180C)
  • Intelligent life test (test while burn-in)
  • 22 Burn-in Chambers, with a total of 800 positions
  • Burn-in test program & 1st article test
  • Adaptation to most common bi configurations (Criteria, AEHR, REALINC…)
  • Military standards
  • QML Certified

Kineticon Systems, Best Choice for Qualification and production non-monitored Burn-in:

  • 128 & 256 Channels
  • Up to 512KB vector depth
  • Up to 10MHz of vector rate
  • On-Board Oscillators (If higher frequency required)
  • Up to 3 power supplies
  • Computer controlled system (Temp, signals, power supplies)
  • 200 square inches of usable DUT area per Burn-in board

Click graphic for larger version


Infinity 160 System, Advanced & Affordable Monitored Burn-in Capabilities:

  • 160 Channels
  • Up to 16MB of vector (memory) depth
  • 16 Bit, 20MHz Clock
  • Device monitoring capability with data logging
  • Report at each failure
  • Digital sampling of driver/monitor channel
  • Individual slot of up to 3 power supplies control
  • 200 square inches of usable DUT area per Burn-in board

Click graphic for larger version


Intelligent Life & Reliability Test:
ELES ART200

  • 288 Channels
  • Up to 6 power supplies per board
  • Real-time monitoring & data logging
  • 32MB memory (vector depth)
  • Frequency up to 40MHz
  • Signal comparison (Test while Burn-in)
  • Different program at each slot
  • Steady state and temperature profile.

Click graphic for larger version


High Power Burn-In System (MCC HPB-5B)

  • Solution For Today’s Smaller & Faster Devices
  • Up To 150W Of Device Power
  • Temperature Variation Up To 30%
  • Individual Temperature Control
  • Ranges From Cooling To Heating The DUT
  • Up To 128 I/O Signals Per BI Board
  • Programmable System Rep-Rates Up To 10MHz

Systems

  • KINETICON 16 CHAMBERS
  • INFINITY 160 (INCAL) 2 CHAMBERS
  • ELES (ART200) 2 CHAMBERS
  • TEST & DEBUGGING 5 STATIONS
  • ESPEC (LTOL)
  • TRIPLE-S (Board calibration)
  • MCC HPB-5B


ISE Labs, Inc. - An ASE Test Company | Copy right 2004 © ISE LAbs, Inc. All rights reserved